CONTACT US 1300 VIADUX (842 389)
  1. Home
  2. Products
  3. Valves
  4. Resilient Seat Valves
  5. Auslite Iii Resilient Seated Gate Valves

AUSLITE III - Resilient Seated Gate Valves

AUSLITE III Resilient Seated Gate Valve (RSGV) are used across Australia for isolating sections and branches in potable and wastewater pipelines above or below ground. Designed and manufactured to AS2638.2, AS1831, and AS4158, AUSLITE III RSGV's are corrosion and impact resistant.

AUSLITE III Resilient Seated Gate Valves

FEATURES

  • Corrosion resistant
  • Impact resistant
  • High strength
  • Ductile Iron gate fully encapsulated in EPDM elastomer to ensure drop tight sealing
  • Grade 431 stainless steel spindle
  • Seal housing incorporates dual O-ring seals and wiper ring
  • Back seal facility to allow for seal replacement under full operating pressure
  • Fusion bonded polymeric coating
  • Isolated fasteners
  • Cast-in feet for safe and easy storage

AT A GLANCE

AUSLITE III RSGV's are available from DN80 to DN400 with an allowable operating pressure of 1600kpa. Available as key or handwheel operation, AUSLITE III RSGV's are suitable up to 70°C, however where complying with AS4020, the maximum temperature is 40°C. Available as CC (clockwise close) or ACC (anti-clockwise close).

SPECIFICATIONS

Size Range:
DN 80 - DN 400


Allowable Operating Pressures:
DN 80 - DN 400–1600kPa


Valve Design: 
For use up to 70˚C Where applicable; for AS 4020 compliance,
max temp 40˚C
Note: Always observe pipe material
recommended operating temperatures
 

End Connections:
Flanged to AS 4087 Fig B5, AS 2129 Table E
 

Certifications:
AS2638.2:2011 - Lic. SMK02420

WaterMark Level 1 - AS 2638.2

WMKA02420 - AS/NZS 4020 Testing of products for use in contact with drinking water

DOWNLOAD TECHNICAL SHEETS

ENQUIRE NOW